Skip to Content
This question has been flagged
postgresqlraspberrypiposbox
1 Reply
5750 डेटा देखने का तरीका
अवतार
Wira Bakti Soenaryo

I have an idle Rasp PI Model B (512MB), so I tried to use it as a posbox. I have download latest posbox software which currently version 12. I have successfull install the image on 16GB SD-Card and start the PI.

But it always stop on "Started LSB PostgreSQL RDBMS Server".

I have update the PI firmware to the latest also have tried on different model B PI (I have two). Both are stop on the same progress. I have tried to use version 11, also stop on the same progress..

Do I miss something here?

अवतार
खारिज करें
अवतार
Wira Bakti Soenaryo
लेखक Best Answer

Well, answering my own question, I don't know why and how.. but it can boot up successfully using version 11.

But, another issue has occur... It can print the IP address information after the boot-up finish. On the Odoo POS it show that Odoo can connect the posbox and all online. But when I tried to print a receipt, nothing happend.

Check on the PosBox page information, printer are connected and online

==========================

"escpos : connected".

==========================

Any help... thanks..

अवतार
खारिज करें
Related Posts Replies डेटा देखने का तरीका ऐक्टिविटी
Raspberry Pi 3 Model B + wireless problem
raspberrypi posbox odoo11
अवतार
1
दिस॰ 17
5518
Adding printer POSBOX Raspberry pi 3
printer raspberrypi posbox Posbox
अवतार
अवतार
2
अग॰ 17
8024
POSBOX image installation in old SDCard ?
installation helpme raspberrypi posbox
अवतार
0
मार्च 15
5472
When Odoo 14 connects to PostgreSQL 15.7, the connection is idle but cannot be released
postgresql
अवतार
0
फ़र॰ 25
4675
psycopg2.OperationalError: connection to server at "localhost" (::1), port 5432 failed: fe_sendauth: no password supplied
postgresql
अवतार
अवतार
अवतार
2
जन॰ 25
12941