I have an idle Rasp PI Model B (512MB), so I tried to use it as a posbox. I have download latest posbox software which currently version 12. I have successfull install the image on 16GB SD-Card and start the PI.
But it always stop on "Started LSB PostgreSQL RDBMS Server".
I have update the PI firmware to the latest also have tried on different model B PI (I have two). Both are stop on the same progress. I have tried to use version 11, also stop on the same progress..
Do I miss something here?
Well, answering my own question, I don't know why and how.. but it can boot up successfully using version 11.
But, another issue has occur... It can print the IP address information after the boot-up finish. On the Odoo POS it show that Odoo can connect the posbox and all online. But when I tried to print a receipt, nothing happend.
Check on the PosBox page information, printer are connected and online
==========================
"escpos : connected".
==========================
Any help... thanks..
สร้างบัญชีวันนี้เพื่อเพลิดเพลินไปกับฟีเจอร์พิเศษและมีส่วนร่วมกับคอมมูนิตี้ที่ยอดเยี่ยมของเรา!
ลงชื่อ| Related Posts | ตอบกลับ | มุมมอง | กิจกรรม | |
|---|---|---|---|---|
|
1
ธ.ค. 17
|
5485 | ||
|
2
ส.ค. 17
|
7985 | ||
|
0
มี.ค. 15
|
5445 | ||
|
0
ก.พ. 25
|
4431 | ||
|
2
ม.ค. 25
|
12666 |
1. Use the live chat to ask your questions.
2. The operator answers within a few minutes.
