Referanslarımız
شركة صحارى للمقاولات
شركة صحارى لمقاولات البناء (SBC) هي شركة إنشاءات عامة رائدة متخصصة في الأعمال المدنية والكهروميكانيكية ، وتعمل داخل المملكة العربية السعودية. يقع المقر الرئيسي للشركة في جدة ولها مكاتب فرعية في الرياض والخبر.تأسست شركة صحارى في عام 1980 ، وقد بنت سمعة طيبة من حيث الجودة والتنفيذ في الوقت المناسب للمشاريع الصناعية والتجارية والسكنية في جميع أنحاء المملكة. صمدت الشركة في وجه تقلبات سوق البناء على مدار الثلاثين عامًا الماضية ونمت بوتيرة صحية İnşaat ve Yenileme
شركة عبدالله عايد العنزي للمقاولات العامة
شركة عبدالله عايد العنزي للمقاولات العامة هي شركة رائدة في مجال المقاولات العامة والتشييد، نحن شركة رائدة في مجال المقاولات العامة والصيانة والتشغيل من تنفيذ ورصف الطرق وإنشاء وتجميل الحدائق العامة وأعمال تشغيل وصيانة وتركيبات إنارة أعمدة الطرق. تتميز الشركة بالتزامها بأعلى معايير الجودة والاحترافية، مع التركيز على تقديم حلول مبتكرة تلبي احتياجات العملاء وتحقق رؤيتهم. تعتمد الشركة على فريق عمل مؤهل وخبرات واسعة لضمان تنفيذ المشاريع بكفاءة وضمن الجداول الزمنية المحددة. İnşaat ve Yenileme
شركة كفاءة البنيان للمقاولات
Client: Kafaat Albonyan Contracting Company (Saudi Arabia)Industry: Construction
Detailed Industry: General Contracting and Project Execution Modules: [Purchase- Inventory- Sales- Accounting- HR]
Website: (Instagram: kafaat_albonyan)
About:
Saudi contracting company specialized in managing and executing diverse construction projects
Known for commitment, professionalism, and quality delivery across multiple regions in the Kingdom
Completed projects in Al Khafji, Al Ahsa, Al Majma’ah, Abu Areej, and other Saudi cities
العميل: شركة كفاءات البنيان للمقاولات (المملكة العربية السعودية)
الصناعة: إنشاءات
تفاصيل الصناعة: خزائن آمنة مقاومة للحريق وغرف مصفّحة
الوحدات: [مشتريات- مخازن- مبيعات- محاسبة- موارد بشرية]
الموقع الإكتروني: (Instagram: kafaat_albonyan)
عن العميل:
شركة مقاولات سعودية متخصصة في إدارة وتنفيذ مشاريع إنشائية متنوعة
معروفة بالالتزام والاحترافية وجودة التنفيذ في مختلف مناطق المملكة
نفذت مشاريع في الخفجي، الأحساء، المجمعة، أبو عريش، ومدن سعودية أخرى İnşaat ve Yenileme
شركة كور لأعمال البنية التحتية
EPC & Turnkey SolutionsCORE executes full-spectrum EPC contracts including concept development, FEED and detailed design, procurement, construction, testing, commissioning, and performance handover. As an EPC contractor CORE's responsibilities include:
Preparation and management of engineering deliverables (discipline-wise drawings, data sheets, calculations and design reports).
Procurement, expediting, inspection and factory acceptance testing (FAT) of long-lead and critical equipment.
Site civil, mechanical, electrical, instrumentation and automation installation works.
Integrated mechanical completion and pre-commissioning scope, followed by commissioning and performance testing.
Preparation of O&M manuals, spare parts lists, operator training programs for handover.
CORE structures EPC execution with defined interfaces, as an integrated project organization chart, and single-point coordination to limit risk and speed decision-making
Mechanical & Piping Systems
Capabilities include full mechanical scope for process and utility systems:
Process piping (carbon steel, stainless steel, duplex, alloy piping) with welding procedures and NDT as required (RT, UT, MT).
Pumping stations: selection, skid-mounting, installation, alignment, and vendors' supervision for centrifugal, submersible, and positive displacement pumps.
Pressure vessels, storage tanks, heat exchangers, and HVAC systems.
Insulation, testing (hydrostatic, pneumatic where applicable), and pigging/flush activities for piping systems.
Piping design adheres to ASME B31.1/B313.3 standards or relevant local equivalents.
Civil & Structural Works
CORE performs comprehensive civil and structural scopes, including but not limited to:
Earthworks, excavation, backfill and compaction.
Reinforced concrete structures: foundations, equipment plinths, retaining walls, platforms, and buildings.
Structural steel supply, fabrication and erection (in
compliance with relevant codes).
Roadworks, drainage, and utilities integration.
All civil and structural works are executed per applicable codes (AASHTO/EN/BS/local authority standards) with engineering calculations, shop drawings, and QA-controlled inspections.
Electrical Systems & Power Distribution
CORE provides medium and low-voltage power systems delivery, including:
Power distribution design and installation (transformers, switchboards, MCCs, distribution panels).
Cable routing, tray systems, lighting protection, and surge protection design/implementation.
Integration with Al Nisf Switchgear and Transformer factories when customized or rapid supply is required.
Electrical designs conform to IEC standards and local utility requirements (MEW, KOC, KNPC where applicable).
Building Services & MEP
CORE provides comprehensive MEP capability for buildings and facilities:
HVAC systems (AHUs, chillers, ducting, controls).
Plumbing and drainage, domestic water systems, and sanitary installations.
Fire protection systems: design and installation of detection systems, hydrants, sprinklers, and FM-200/CO2 systems where requested.
Lighting design and supply (in coordination with Al Nisf Lighting Factory), emergency lighting and power backup systems.
MEP design & installation complies with relevant building and client requirements.
Instrumentation, Control & Automation
CORE delivers instrumentation and automation solutions tailored to process and utility control:
Instrument selection, loop diagrams, cable schedules, and installation.
PLC programming HMI design, and SCADA integration for centralized monitoring and control.
Control system FAT, SAT, commissioning and performance verification.
Integration of distributed control systems (DCS) and third-party vendor systems where required.
Automation engineering follows ISA, IEC 61131 (PLC standards) and industry best-practice for cyber-aware deployments.
Water & Wastewater Packages
CORE has a specific capability in water/wastewater process delivery including:
Design, supply and installation of chlorination packages and chemical dosing skids (including storage, dosing pumps, metering, and containment).
Treatment process equipment: filters, clarifiers, dosing systems, disinfection systems, and associated instrumentation.
Pumping stations, wet walls, sewer networks, and associated civil/mechanical works.
Process testing, sample-taking regimes, and quality control to meet client and regulatory discharge standards.
All process works follow recognized treatment design criteria and project-specific performance guarantees.
Specialized Packages & Skid-Mounted Solutions
CORE delivers packaged and skid-mounted solutions for accelerated deployment:
Chemical dosing and metering skids (fabrication, factory testing, integration).
Pumping skids and packaged pumping stations.
Electrical MV/LV skids and control housings.
These prefabricated solutions are designed for modularity, reduced site works, and streamlined commissioning.
Operations, Maintenance & Aftercare
CORE offers post-handover services including:
Commissioning support and performance monitoring.
Preventive maintenance planning and spare parts supply.
Service contracts and emergency response for critical assets.
This capability ensures continuity of operations and supports clients' lifecycle asset management strategies.
Contract Documentation
For each project CORE typically provides as part of the EPC deliverables:
Feasibility and concept reports; FEED and detailed design documentation.
Project execution plan (PEP), method statements, construction schedules, and resource-loaded P6 schedules.
Procurement packages, vendor data, inspection and test plans (ITPs), and FAT documentation.
QA/QC records, NDT reports, MTRs (material test reports), and commissioning certificates.
O&M manuals, as-built drawings, and operator training records.
Standards, Codes & Compliance
CORE's technical work is governed by adherence to applicable international and local codes including but not limited to:
ISO 9001, ISO 14001, ISO 45001 (Quality, Environment, Health and Safety systems).
IEC, IEC 60076 (Transformers), ISA standards (Instrumentation), ASME and API for pressure systems, and ASME B31 piping codes.
Local regulations: MEW, KOC, KNPC, and other client-specific standards.
CORE maintains documented procedures to ensure procurement, fabrication, installation, inspection and testing follow contractual and regulatory obligations. İnşaat ve Yenileme
شركة كيان المملكة كاك المحدودة
شركة كيان المملكة كاك المحدودة هي شركة سعودية ذات مسؤولية محدودة متخصصة في قطاع المقاولات ومصنفة ضمن الدرجة الأولى. تأسست في عام 2003 على يد نخبة من الخبراء والمتخصصين في مجال المقاولات، وتمتلك خبرة واسعة في تنفيذ مشاريع البنية التحتية على مدار سنوات طويلة.تعتمد الشركة على فريق عمل عالي الكفاءة من المهندسين والفنيين المؤهلين، وتولي اهتمامًا كبيرًا بتوفير بيئة عمل آمنة وصحية، مع الالتزام التام بالمعايير البيئية ومتطلبات الاستدامة. وتتعاون كيان المملكة مع جهات حكومية وخاصة لتنفيذ المشاريع وفق أعلى مستويات الجودة والاحترافية، بما يحقق أهداف عملائها ورؤيتهم المستقبلية.
Kayan Al-Mamlakah KAK Ltd. is a Saudi limited liability company specialized in the construction sector and classified as a First-Class Contractor. Established in 2003 by a team of experts and professionals in the field, the company has extensive experience in delivering infrastructure projects across various sectors.
Kayan Al-Mamlakah relies on a highly qualified team of engineers and technicians and is strongly committed to maintaining a safe and healthy work environment. The company adheres to environmental standards and sustainability principles in all its operations. It works closely with clients from both the public and private sectors to deliver projects at the highest levels of quality and professionalism, turning their vision into reality.
İnşaat ve Yenileme
شركة ماسة للمقاولات
شركة ماسة للمقاولات متخصصة في توفير وتوريد المعدات الثقيلة وخدماتها لمشروعات المقاولات في أنحاء المملكة العربية السعودية. وهي شريك موثوق للمقاولين والمطورين في تأمين الآليات الثقيلة المطلوبة لأعمال البناء، البنية التحتية، الطرق، والمشاريع الصناعية، مع التركيز على الكفاءة والجودة والالتزام بالمواعيدİnşaat ve Yenileme
